Engine Interface Module EAM108 Electric Governor For Generator is rugged enough to be placed in a control cabinet or engine mounted encosure with other dedicated control equipment. If water, mist or condensation may come in contact with controller, it should be mounted certically. This will allow the fluid to drain away from the speed control unit.

Input impedance (terminals D & A)    60K ohms

Output impedance (terminals 11 & 12)    5.8K ohms

Nominal output voltage (terminals 11 & 12)   1.50V DC

Output voltage range ((terminals 11 & 12)    0-2.6V DC

Nominal input voltage (terminals D & A)   5.0V DC

Transfer function   -1.9 volts/volt (without trim pot)   -1.1 volts/volt (with trim pot)

Temperature range    -400 to +850 C

DC supply range (terminals 1 & 12) 15 to 32V DC

DC supply current (terminals 1 & 12) 20mA

Trim pot (terminals A, B,& C)    use 5K trim potentiometer