Speed control module 4914090 generator electronic governor is PID adjustment design. It can instant and accurately reaction to the transient change of the loading then to make the engine speed in stable situation. It can perfectly control the engine speed by connected to the EFC series Electronic Actuator and Speed Sensor.
Application Features
A. Low smoke displacement, soft noise
Meet the demand of environment protection imp rive people' S
Feeling.
B. Easily start in cold, plateau and Ww pressure areas,
Especially for N-G-250kw and K-G-300kw sets.
C. High ability to anti-disturbance Stable operation due to the large power walkie-talkie·
D. Actuator can not be damaged in case of short circuit due to
The output protector.
E. Diesel with water pump cam start with wad, the range of round per minute cam be±600, that is 1000-1200 rpm.
Principles
The oil valve of the speed regulator is totally
Open and if the supercharger low-speed and with little
Air input, So it is difficult to ignite the fuel and cannot
Completely ignite and have thick smoke displacement. It starry400-1200rpm, It need 3-5or 10-20 minute
To accelerate.
It can easily start if we decrease the oil input. After it start, then increase' The oil input, the speed and the diesel generator temperature will increase gradually. Thus, the smoke displacement is Ww and the noise is soft.
The operation of and use of the set after start is same as other regulators.
Operation methods
A. Appearance Feature: It is same as other regulators.
B. Switches: Switches for after start while all the 3 switches downside, it can celebrate immediately, while switch them upside respectively. It can accelerate in 5' , 10' , 15respectively.
As the picture described (7-10 cannot connect prompt switches). The time more needs the smoke thinner and much easier to start.
C. The lasting time of the start switch vibration is a little wag...
During acceleration, if there is displacement stroke and displace black smoke, please regulate GAIN.
D. If the sets adopt self-start
Specification
Generator Speed governor 4914090 |
|
RPM Stability: |
<±0.25% |
Speed Range: |
1KHz ~ 6.5KHz |
Thermal Stability: |
Max±0.7% |
IDLE Regulation: |
260±20Hz |
DROOP Regulation: |
Minimum 15Hz±6Hz/ 1 Amp |
Maximum: 400Hz±75Hz/ 1 Amp |
|
External Speed Regulation: |
±200Hz (with 1 KΩconnected) |
AUX Input Sensitivity: |
148Hz / 1V.,±10Hz |
Impedance: |
1MΩ |
|
|
ENVIRONMENT: |
|
Working Humidity Range: |
Maximum 95% |
Environment Temprature: |
'-15 ~ 55°C |
Shocking: |
25HZ 2mm |
|
|
INPUT POWER SUPPLY: |
|
Voltage: |
12 or 24V DC |
Grounding Pole: |
Negative pole |
Power Supply: |
Negative pole |
Actuator Continuous Current: |
Maximum 2.5A |
Insulating strength |
≥500MΩ |
Contact: Jack
Phone: 0086-19906045242
Tel: 0086-592-7161550
Email: sales@aotchina.com
Add: No.21 Yufu Road, Jimei Disctrict, Xiamen City, China 361000