The EG2000 is a universal generator governor / engine speed controller equipped with Smoke Limiting
& Idle Speed. Suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps,
also can be used with Low Current, Electric over Hydraulic Oil Pumps Type Governor Actuators.
*Works on a wide ranges of MPU/flywheel frequencies
*15 Amp Max Output
*Suitable for all types of diesel and Gas engines
*High Sensitivity and stable at Low Frequency Variations
*Moisture, vibration, and rust protected, Epoxy encapsulated electronics
*For Use With Isochronous Generators & Automatic Paralleling PLC controls
*Idle Speed Adjustment and connections for a Remote Speed POT
Generator Speed Controller EG2000 |
|
Operating Voltage |
12 or 24 VDC ±20% |
Output Current |
0.5 ~ 15 A |
Run Speed Adjustment range |
Speed adjustment Potentiometer (30 turn); 4 Segment Dip |
Idle Speed Adjustment Range |
Run Speed 30 ~ 85% |
Ramp Time |
3 ~ 20 Sec |
Remote Speed Pot |
Ext. Remote speed pot terminal 6, 7, 8 (ILS) and 6, 7, 9 |
Temp. Stability |
<0.01% |
Run Speed Stability |
± 0.25 % at steady state |
MPU input signal |
1 ~ 120VAC RMS |
Droop |
4.00% |
Adjustment |
Run Speed, Idle Speed, Ramp Time, Droop, Integration, Gain |
Mechanical Vibration |
1G @ 18 ~ 30 Hz, 2.5G @ 48 ~ 70 Hz |
Relative Humidity |
< 95% |
Operating Temperature |
-40 ~ 85°C |
Storage Temperature |
-40 ~ 85°C |
Dimensions |
147mm L * 114mm W * 50mm H |
Weight |
690g ± 2% |
Contact: Jack
Phone: 0086-19906045242
Tel: 0086-592-7161550
Email: sales@aotchina.com
Add: No.21 Yufu Road, Jimei Disctrict, Xiamen City, China 361000