Generator Controller

  • Diesel Engine Electronic Control Module DSE705 With ATS Function
  • Diesel Engine Electronic Control Module DSE705 With ATS Function
  • Diesel Engine Electronic Control Module DSE705 With ATS Function
Diesel Engine Electronic Control Module DSE705 With ATS FunctionDiesel Engine Electronic Control Module DSE705 With ATS FunctionDiesel Engine Electronic Control Module DSE705 With ATS Function

Diesel Engine Electronic Control Module DSE705 With ATS Function

  • Model: DSE705
  • Origin: China
  • In stock: yes
  • warranty: 1 year
  • Product description: The Generator Control Unit DSE705 is an Auto Transfer Switch Control Module designed to monitor the mains (utility) supply. When the mains (utility) power fails the module sends a start request to t
  • INQUIRY

Diesel Engine Electronic Control Module DSE705 With ATS Function

Main Features:

Protected solid state (PSS) outputs

Front panel mounting

Front panel programming

LED indicators

Configurable timers

Configurable outputs

Single/three phase mains sensing

 

Benefits:

Transfer’s between mains and generator power

On-site module configuration to match user requirements

 

Operation:

The module is operated by the three push-buttons on the front:

Manual Off Load –This is used to manually start and run the engine off load. Should the mains (utility) supply fail, then the load is transferred to the generator automatically.

Manual On Load - This mode is used to manually start and run the engine on load.

Auto Mode –This puts the module into automatic mode, where it will await a mains failure. Upon detection it will send a start request to the generator control unit.

 

DC SUPPLY

Continuous Voltage Rating

8 V to 35 V continuous

Maximum Operating Current

100 mA at 12 V, 105 mA at 24 V

Maximum Standby Current

60 mA at 12 V, 55 mA at 24 V

Maximum Sleep Current

40 mA at 12 V, 35 mA at 24 V

Cranking Droputs

Able to survive 0 V for 50 mS, providing supply was at least

10 V before dropout and supply recovers to 5 V

This is achieved without the need for internal batteries

INPUTS

Digital Inputs A to F

Negative switching

Analogue Inputs D

Configurable as:

Negative switching digital input

0 V to 10 V,4 mA to 20 mA,0 Ω to 240 Ω

Analogue Inputs  A TO C

Configurable as:

 

Negative switching digital input:0 Ω to 480 Ω

OUTPUTS

Output A (Fuel)

10 A short term, 5 A continuous,at supply voltage

Output B (Start)

10 A short term, 5 A continuous,at supply voltage

Auxiliary Outputs C, D, E &F

2 A DC at supply voltage 

GENERATOR & MAINS   (UTILITY)

Voltage Range

15 V to 415 V AC (Ph to N),26 V to 719 V AC (Ph to Ph)

Frequency Range

3.5 Hz to 75 Hz

Scan the qr codeClose
the qr code